DYNALINK WLAN ADSL ROUTERMODEMSWITCH DRIVER DETAILS:
|File Size:||29.4 MB|
|Supported systems:||Windows XP (32/64-bit), Windows Vista, Windows 7, Windows 8.1, Windows 10|
|Price:||Free* (*Free Registration Required)|
DYNALINK WLAN ADSL ROUTERMODEMSWITCH DRIVER
Click Disconnect only if you wish to disconnect manually. You are now successfully connected to the Internet. If previously the computer had a dial-up modem for Internet Dynalink WLAN ADSL RouterModemSwitch, check your browser setting. The system may still try to communicate through the previous connection. Close Internet Explorer to take effect. Wireless support is enabled by default. The router is a wireless access point. IEEE g and b wireless network standards are supported.
For indoor operations, these standards provide typically 20m and 60m range respectively. Wireless security features are disabled for ease of initial install. It is important to enable wireless security to protect your network after you have verified that all wireless computers can connect.
Connect via Ethernet or wirelessly from a computer to configure for wireless operation. Start your web browser. Enter the default address Username and Password are both admin.
This is also described in Step 1, Section 5 Going On-line 2. Wireless computers scan all channels and once connected, use the same channel as the access point. Set up wireless computers according to the vendor s instructions. Because the router is a wireless access point, select infrastructure mode. Do not use Adhoc peer-to-peer mode.
The table displays the hardware MAC addresses of all connected wireless computers. Please make sure your wireless computer also supports the same encryption type. Any printable characters may be used. Good practice is to use a strong password of random characters and is over 20 characters long. Click Apply to take effect. The same key must be entered into your computer when you attempt to Dynalink WLAN ADSL RouterModemSwitch wirelessly.
Refer to the vendor s instructions of your computer or wireless adaptor for details. Usually the process is like this: Click on a wireless icon at the right hand bottom corner of your desktop.
Select your wireless router from a list of wireless networks available. Your wireless router is identifiable by its SSID. Windows will ask for a Network Key. Enter the Pre-Shared Key you have chosen for the router. It allows users Dynalink WLAN ADSL RouterModemSwitch talk without using a conventional telephone service and often provides lower call costs. A full description on this topic is found on Chapter 4: Connect a telephone handset to Phone1 port. Plug the microfilter into the telephone wall outlet.
Dynalink ADSL2+ Modem Router Quick Setup Guide - PDF
Handsets are not provided. Any standard telephone handsets may be used. It is necessary to subscribe and receive the settings required from your VoIP service provider in order to set up VoIP service.
The settings required are specific to your VoIP provider. Before you start, make sure you have received appropriate settings from your service provider. Enter the port number of the SIP proxy server if specified by the service provider. Enter Dynalink WLAN ADSL RouterModemSwitch Domain Name or IP and the port required for the service.
Dynalink WLAN ADSL RouterModemSwitch your SIP account details. Dynalink sources its modems from Askey Computer Corporation in Taiwan and became Askey s first export customer. Dynalink is the only. ADSL 2+ Modem Router Quick Set-up Guide. Important Wireless LAN (Only for computers that support wireless LAN. This option Switch on the router.